EASY TO USE - TIME SAVING

Soudal Tape for perfect joints permits the application of a perfectly parallel protective tape within which a perfect sealant joint can be extruded. In conjunction with the enclosed smoothening tool perfect joints are now at the reach of everyone.

How to use properly?

1. ALWAYS clean the surface before commencing!
   First peal off approximately 30 cm (12”) of the white backing paper.
   
   
2. Fix the outside of the tape to the wall, make sure the tape is still folded while placing it into the corner. Roll the tape down the wall while pulling off the backing paper. The roll itself will act as conductor.
   
   
3. Fold over the other half of the tape and fix into place. Make sure you don’t pull the tape away from the corner.
   
   
4. Remove the plastic film. Only the metal tape should be left on each side.
   
   
5. Apply the sealant using a sealant gun.
   
   
6. Smooth the joint using the enclosed smoothening tool, keeping it as perpendicular as possible to the wall.
   
   
7. Remove the CornerTape (metal tape) immediately after. Make sure the sealant hasn't cured!
   
   
8. A perfect result every time!

The Tape must be used at room temperature. Cover all corners with the Tape before applying the sealant.