Description
Soudaseal 270HS is a high quality single component adhesive-sealant with high stiffness and very high adhesive strength. It is based on MS-Polymer®, chemically neutral and fully elastic.
Characteristics
- High performance mechanical properties
- Combines high stifness with very high bond strength
- High green strength, quick build-up of end strength, high sheer
strength after full cure
- Does not contain isocyanates, silicone, solvent
- Can be sanded after full cure
- Flexible elastic rubber – movement accomodation up to 20%
- No bubble formation within sealant (in high temperature and humidity
applications)
- Very easy to tool and finish
- Colour stability and UV resistance
- Can be painted wet-on-wet in paint trains with most industrial paints
- Withstands all climatic conditions
- Minimal health and safety considerations
Applications
- For use in elastical structural bonding applications in the car-,
coach-, caravan-, marine-, train-, aerospace industries where a tough
and flexible bond is required.
- Structural elastic bonding between metal surfaces, coated surfaces
and many plastics (not PE, PP, Teflon)
- Bondings which pass through paint tunnels
- Structural bonding in vibrating constructions
- Connection joints in sheet metal fabrication
Directions for use
Method: Manual or pneumatic caulking gun
Application temperature: +1°C until +30°C
Cleaning: White Spirit or Surface Cleaner immediately after application and before curing
Tooling: soapy solution before skin formation
Repair with: Soudaseal 270HS
Remarks
- Soudaseal 270HS can be coated with many types of paints and
varnishes. Due to the large variety of paints and coatings a
compatibility test is strongly recommended. The drying times of alkyd
resin based paints may increase.
- Soudaseal 270HS can be painted immediately after application “wet on
wet” with waterbased industrial paints in paint trains at temperatures
of up to 200°C during up to 45 minutes.
- Soudaseal 270HS can be applied to a wide variety of substrates. Due
to the fact that specific substrates such as plastics, polycarbonate,
etc, may differ from manufacturer to manufacturer, we recommend
preliminary compatibilty test.
- This product can not be used as a glazing sealant.