For MSDS & COSSH Sheet enquiries please contact .
Fix All demonstration video


Fix All: mission accomplished (helicopter movie)

Soudaseal MS Clear

Soudaseal MS Clear is a high quality, crystal clear, neutral, elastic, 1-component adhesive based on MS-Polymer.
- Crystal clear formulation
- Excellent adhesion on nearly all surfaces, even if slightly moist.
- Very good mechanical characteristics.
- Good extrudability even at low temperatures
- Ecological advantages – free of isocyanates, solvents, halogens and acids
- Can be painted with all water based paints and many other systems (to be tested)
- Permanent elastic after curing
- All common bonding and sealing applications, both in and outdoor.
- Transparent and elastic bonding in construction and building applications.
- Invisible bonding of glass and other transparent materials in indoor
Directions for use
Application method: With manual- or pneumatic caulking gun.
Cleaning: With Fix ALL Cleaner immediately after use. Cured Soudaseal MS Clear can only be removed mechanically.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
- Soudaseal MS Clear is paintable with waterbased paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before appication.
- The drying time of alkyd resin based paints may increase.
- Soudaseal MS Clear can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test.
- Soudaseal MS Clear is not suitable for expansion joints.
- Do not use in applications where continuous water immersion is possible.
- Not suitable for sanitary applications.
- Soudaseal MS Clear has a good UV resistance but can discolour under
ewtreme conditions or after very long UV exposure.
- Soudaseal MS Clear can not be used as a glazing sealant.
- Soudaseal MS Clear cannot be used on natural stone. Because the adhesion surface will discolour under influence of the sealant (looks wet) and because this is visible through the crystal clear sealant it
seems like staining has occurred.